Hello, welcome to visit here is your website name website!!
SLOGAN SLOGAN SLOGAN slogansloganslogan
+86-156-3824-7978 +86-371-5666-9277
              

Use terrazzo machines laying concrete mortar bonding

Use terrazzo machines laying concrete mortar bonding   Determines the standard block location in the cement mortar: crosshair intersection that has been identified in the midst of one standard location (such as when to cross as the nucleus Raphe Magnus, you can cross the intersection diagonally installed two pieces of standard blocks), standard block as the standard of the room level and theodolite, 90 degrees when the paved square and level detailed correction. After you determine the standard block, according to pull cross the baseline for paving.  
Use terrazzo machines laying concrete mortar bonding
Virtual Pu dry hard cement mortar combined layer: check has been brush good of cement pulp no dried phenomenon Hou, can began Pu mortar combined layer (with Pu with masonry, shall not Pu of area had big), laying thickness to 2.5-3cm suitable, put Shang terrazzo Board Shi than ground elevation line high out 3~4mm suitable, first with scraping bar scraping flat, again with iron wipe child took real wipe flat, then using terrazzo mechanical for prefabricated terrazzo Board try Pu, on good aspect sewing, with rubber sleep percussion Board middle, vibration real mortar to laying height Hou, Will try Pu right of prefabricated terrazzo Board set off moved to aside, check mortar Shang surface, as and terrazzo Board end of phase anastomosis Hou (as has empty at, application mortar fill), full poured a layer w/c for 0.5 around of pigment cement pulp, again Pu prefabricated mill slate, Pu Shi to corners while falls, with rubber hammer light knock, at any time with level feet or straight feet leveling.  Virtual Pu dry hard cement mortar combined layer: check has been brush good of cement pulp no dried phenomenon Hou, can began Pu mortar combined layer (with Pu with masonry, shall not Pu of area had big), laying thickness to 2.5-3cm suitable, put Shang terrazzo Board Shi than ground elevation line high out 3~4mm suitable, first with scraping bar scraping flat, again with iron wipe child took real wipe flat, then using terrazzo mechanical for prefabricated terrazzo Board try Pu, on good aspect sewing, with rubber sleep percussion Board middle, vibration real mortar to laying height Hou, Will try Pu right of prefabricated terrazzo Board set off moved to aside, check mortar Shang surface, as and terrazzo Board end of phase anastomosis Hou (as has empty at, application mortar fill), full poured a layer w/c for 0.5 around of pigment cement pulp, again Pu prefabricated mill slate, Pu Shi to corners while falls, with rubber hammer light knock, at any time with level feet or straight feet leveling.

NEXT: Next:Terrazzo tiles laying Schematic flow diagram

PREV:Previous:The difference between terrazzo flooring terrazzo floor tile

Copyright© 2016-2019 Zhengzhou Turui Machinery Co., Ltd XML