HOME > NEWS & EVENTS > Company News > Hot products   |   Leave a message

Terrazzo tile equipment commissioning test manually

introduction:【一】 Terrazzo tile equipment manual confirmation before commissioning 1.not less than 0.5 Mpa compressed air
2.The upper hydraulic oil filling to the oil level 3.dont leak in the hydraulic system 4.not leak pneumatic system 5.the coole


【一】Terrazzo tile equipment manual confirmation before commissioning 1.not less than 0.5 Mpa compressed air
2.The upper hydraulic oil filling to the oil level
3.don't leak in the hydraulic system
4.not leak pneumatic system
5.the cooler in the cooling water circulation normal
6.Each part of the reliable screw fastening
【二】 in the power distribution ark choose "manual/automatic", and each gear rotating to the manual position, make the whole machine is in manual mode. Stir item by item, inching "stir", "closed", "pump", "pump off", point "press up", "press down", "die transposition box", "a cloth", "a cloth back", "lay flat to start", "secondary cloth start", "demoulding brick start", "vibration", such as button, observe whether the action is smooth, the proximity switch is correct, reliable, and adjusted to the correct position. And can be used manually adjust parts movement right after the automatic operation.
【三】for automatic operation preparation: 1 press to upper limit 2 demoulding to upper limit 3 spread to upper limit 4 pressure machine, mold release, brick, a cloth, flat, secondary cloth on the frame below 5 into 10 mm thick on the lower mold base boards 6 check above the proximity switch indicator is on, other switch indicator light is not bright After check and correct, transfer the manual/automatic to automatic position, the touch screen,Set parameters, press the "auto", can run automatically. In the whole process of debugging, observe the working condition of parts is normal, the abnormal situation, should immediately press the stop button to stop, ruled out again after commissioning, until the normal operation

Contact us

  • E-mail: sales@turuimac.com
  • Skype:turuimac-123
  • Mobile: +86-1833-711-6237
  • Tel: +86-371-5666-9277

Subscribe

Stay up to date with latest news from our company.We promise we won't spam you.

Contact us

E-mail: sales@turuimac.com
Skype:turuimac-123
Sales Department Tel:+86-371-5666-9277
Mobile: +86-1833-711-6237
Office Address: Xushui Industrial Park, Zhengzhou city, Henan province, P.R. China.

Copyright© 2015-2016 Zhengzhou Turui Machinery Co., Ltd XML